FAR Calculator
Free FAR calculator for your plot
Find your plot’s FAR and how much you can build — free, with our FARchitect tool.
Before you draw a single line, one number decides how much you can build: the FAR — Floor Area Ratio — of your plot. Get it wrong and your design will be sent back by RAJUK; get it right and everything else falls into place.
FARchitect, Space Up’s free FAR calculator, checks your plot against the DAP rules and shows your FAR, your maximum buildable area and how many floors that allows — free, in a few clicks. This guide explains what FAR is, the DAP values for Dhaka’s main areas, and how the calculator works.
What FAR is — and why it limits your building
FAR — Floor Area Ratio — is the total floor area you are allowed to build, divided by your plot area. A FAR of 3.4 on a 5-katha plot means the total floor area of all floors together can be 3.4 times the plot area.
FAR is the DAP’s main tool for controlling how dense a neighbourhood becomes. RAJUK checks it on every approval: if your drawings exceed the FAR for your block, the file is rejected. That is why the FAR check comes before design, not after.
- FAR 3.4 — you may build total floor area equal to 3.4 × your plot area.
- It applies to all floors together — ground floor plus every floor above it.
- It is set by the DAP — it differs by area and by road width, not by what you would like to build.
DAP FAR by area
The DAP sets a FAR for each block of Dhaka. These are the published DAP block values for the areas people ask about most:
- Mirpur: 3.4
- Uttara: 4.5
- Dhanmondi: 5.0
- Gulshan–Banani: 5.5
These are DAP block values. Your plot’s exact FAR also depends on the road in front of it — the Dhaka Building Rules 2025 (Table 5) set FAR by road width as well. The calculator checks both.
How the free calculator works
FARchitect is Space Up’s free FAR and DAP calculator. There is nothing to install and nothing to pay — it runs in your browser.
- 1. Enter your plot size — in katha or square feet, whichever you know.
- 2. Pick your area or zone — Mirpur, Uttara, Dhanmondi, Gulshan–Banani, or another Dhaka area.
- 3. See your result — your FAR, your maximum total buildable area, and how many floors that allows.
The calculator gives you the planning numbers. The final design still needs setbacks, height limits and the permitted use checked — that is what an architect does before filing with RAJUK.
A worked example
An example, using the published DAP value — not a promise for any particular plot:
- Plot: 5 katha in Mirpur.
- FAR: 3.4 (DAP block value for Mirpur).
- Maximum total floor area: 5 × 3.4 = 17 katha of floor space across all floors.
- Over 6 floors: about 2.8 katha of floor area per floor.
This is an illustrative example. Your plot’s real numbers depend on its exact zone, road width, setbacks and ground coverage — check them in the calculator, or ask us.
What else the DAP controls
FAR is the headline number, but the DAP controls more than floor area. A design that passes FAR can still fail on any of these:
- Setbacks — how far the building must stand from each plot boundary.
- Height limits — how tall the building may be in your block.
- Permitted use — whether your plot may be residential, commercial or mixed use.
- Ground coverage — how much of the plot the building’s footprint may cover.
All of these are checked together in a RAJUK approval. Space Up checks them before drawing, so the file goes in complete.
How Space Up helps
We have taken more than 100 projects through RAJUK approval, and every one of them started with a FAR check. When you work with us, the DAP rules for your plot are checked first, the design is drawn inside them, and the approval file is prepared in-house — drawings, soil test and survey together.
- Free FAR check with FARchitect before you commit to anything.
- Full design — architectural, structural, electrical and plumbing drawings.
- RAJUK approval filing and follow-up, 100+ approvals so far.
- Soil test and digital survey arranged for your plot.
সচরাচর জিজ্ঞাসিত প্রশ্ন
What is FAR in Bangladesh?
FAR — Floor Area Ratio — is the total floor area you may build divided by your plot area. A FAR of 3.4 means the floor area of all floors together may be 3.4 times the plot area. It is set by the DAP and checked by RAJUK on every approval.
What is the FAR for Mirpur?
The published DAP block value for Mirpur is 3.4. Your plot’s exact FAR can also depend on the road in front of it, under the Dhaka Building Rules 2025 (Table 5). Check your plot in the free calculator.
How do I calculate FAR for my plot?
Multiply your plot area by the FAR for your area. A 5-katha plot in Mirpur at FAR 3.4 allows 17 katha of total floor area across all floors. The free FARchitect calculator does this for you — enter your plot size and area and it shows your FAR, maximum buildable area and floors.
Does FAR depend on road width?
Yes. The DAP sets a FAR by block, and the Dhaka Building Rules 2025 (Table 5) also set FAR by road width. A plot on a wider road may be allowed a higher FAR than the same block’s base value. The calculator checks both.
Can I build more than the FAR allows?
No — FAR is a cap set by the DAP for your block and road. Drawings that exceed it are rejected by RAJUK. If your plot qualifies under a different provision, an architect can check it — but you cannot simply choose a higher FAR.
Is the FAR calculator free?
Yes. FARchitect is free to use in your browser — enter your plot size and area and see your FAR, maximum buildable area and floors. If you want the design and RAJUK approval done for you, our fee is quoted per project.
কথা দিয়ে শুরু করুন
আপনার প্লট বা প্রজেক্টের কথা জানান — কী লাগবে, কত খরচ, কত সময়, সৎভাবে জানিয়ে দেব।
Open the free FAR calculator অ্যাপয়েন্টমেন্ট বুক করুন WhatsApp
আপডেট: নভেম্বর ২০২৬ · সরকারি ফি ও ল্যাবের রেট বদলাতে পারে — ফাইল করার সময় বর্তমান তালিকা যাচাই করুন। Space Up-এর নিজের ফি প্রজেক্ট অনুযায়ী জানানো হয়।
